• 64 to 2048 Mbyte uncompressed capacity
  • Full -40°C to +85°C industrial temperature range
  • Compact 1.8" drive form-factor
  • 44 pin, 2mm IDE interface
  • 32-bit ECC and wear-leveling for data integrity
  • 1000G operating shock, 15G vibration
  • 12.5 Mbyte/sec media transfer rate
  • 4.0 Mbyte/sec sustained Read throughput
  • 3.5 Mbyte/sec sustained Write throughput
  • 10 year data integrity

 

 
 

The AT1830 Mustang is the smallest member of the Memtech series of IDE solid state drives, available in an extremely compact 1.8" drive form-factor. It employs sector erasable NAND EEPROMs (Flash Memory) to deliver up to 2 Gbytes of uncompressed, nonvolatile solid state storage in an extremely small, rugged form-factor. It has a sustained read data throughput 4.0 Mbytes per second and a sustained write throughput of 3.5 Mbytes per second with a maximum current draw of 35 mA.

The interface is implemented using a Flash IDE controller that employs a 32-bit error detection and  correction mechanism to provide the optimum in data integrity over a wide operating temperature range. It's small form-factor and low-power operation make the AT1830 ideal for handheld, portable or embedded applications requiring up to 2 Gbytes of data storage. Advanced PIO modes and multi-sector transfer modes are supported, as is LBA addressing.

Back to top

 
   
 
  • 64 to 1024 Mbyte uncompressed capacity
  • Full -40°C to +85°C industrial temperature range
  • Compact 1.8" drive form-factor
  • 44 pin, 2mm IDE interface
  • 24-bit ECC and wear-leveling for data integrity
  • 1000G operating shock, 15G vibration
  • 4.0 Mbyte/sec media transfer rate
  • 1.7 Mbyte/sec sustained Read throughput
  • 1.0 Mbyte/sec sustained Write throughput
  • 10 year data integrity
  • This product is being discontinued

 

 
 

Memtech SSD recommends the AT1830 for new designs.  

Back to top

Download Adobe Acrobat
© 2005, Memtech SSD Corporation – 800.445.5511